For conductive or inductive conductivity measurements

SMARTPAT COND 1200

Conductive conductivity sensor for water and wastewater applications

2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
Process connection: G 3/4 (male)
0.1…20 mS/cm; Max. +135°C / +275°F
With stainless steel electrodes and Pt1000 for temperature compensation

SMARTPAT COND 3200

Conductive conductivity sensor for condensate, process, boiler feed or (ultra)pure water

2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
Process connection: G 3/4 (male), 3/4 NPT (male)
0.05…1000 μS/cm; Max. +135°C / +275°F
With stainless steel electrodes and Pt1000 for temperature compensation

SMARTPAT COND 5200

Conductive conductivity sensor for chemicals and industrial wastewater applications

2-wire loop powered, 4…20 mA/HART® 7, for direct connection to a PCS
Process connection: G 3/4 (male), 3/4 NPT (male)
10 μS…15 mS/cm; Max. +130°C / +266°F
With graphite electrodes and Pt1000 for temperature compensation

SMARTPAT COND 7200

Conductive conductivity sensor for food, beverage and pharmaceutical applications

2-wire loop powered, 4…20 mA/HART®7, for direct connection to a PCS
Process connection: VARIVENT® N, Tri-Clamp 1-1/2", 2"
0.05…1000 μS/cm; Max. +135°C / +275°F
With stainless steel electrodes (Ra <0.8 μm) and Pt1000 for temperature compensation

OPTISENS COND 1200

Conductive conductivity sensor for water, wastewater, process water or pure water

For use with analytical transmitter
Process connection: G 1/2, G 3/4, G1, 3/4 NPT (male)
0.05 μS/cm…20 mS/cm; Max. +135°C / +275°F
With two stainless steel, titanium or graphite electrodes and Pt100 for temperature compensation

OPTISENS COND 7200

Conductive conductivity sensor for food, beverage and pharmaceutical applications

For use with analytical transmitter
Process connection: Clamp DN25-40, 1-1/2"
0.05…1000 μS/cm; Max. +135°C / +275°F
With stainless steel electrodes and Pt100 for temperature compensation

OPTISENS IND 1000

Inductive conductivity sensor for water, wastewater and chemical applications

For use with analytical transmitter
Process connection: G 1-1/2 (female) and immersion versions
1…2000 mS/cm; Max. +100°C / +212°F
Electrodeless conductivity sensor with Pt1000 for temperature compensation

OPTISENS IND 7000

Inductive conductivity sensor for food and beverage applications

For use with analytical transmitter
Process connection: Conical nozzle (DIN 11851) DN50 and DN65, VARIVENT® N, G1-1/2 or G2 (male, non-hygienic)
0.5…2000 mS/cm; Max. +125°C / +257°F (for SIP/CIP)
Sterilisable PEEK sensor (FDA and EC1935/2004 conform) with temperature compensation

Click here to Request A Quote
or call us today at 704-545-4500