Search:
Advanced Search
Industrial Metering Products
>
Electronics
AMCO CTR 27 Totalizing Counter
Ref: DD10040
CTR27 Batter Powered Resettable Totalizing Counter, eith-digit (8mm) high characters, black LCD, internal lithium battery, ten year battery life,+14°F to +140°F operating temperature.
If item is in stock, it should ship within 1 to 2 business days
Specification Sheet
Price: $71.00
AMCO CTR 27A AC/DC Module for CTR 27
Ref: DD10050
CTR27A AC/DC Module for Long runs, This adaptor must only be connected to the CTR27, +14°F to +140°F operating temperature, panel reset enable.
If item is in stock, it should ship within 1 to 2 business days
Specification Sheet
Price: $31.00
AMCO CTR 22 Pre Scaler Counter
Ref: DD10060
CTR22 Pre scaler counter with eight-digit LCD 0.35" high characters, internal lithium battery, eight year typical life, optional AC/DC mode, +32°F to +167°F termperature range, separate high and low speed inputs are provided for connection of signal source for counting and rate modes, or for use as run/stop commands for timing modes.
If item is in stock, it should ship within 1 to 2 business days
Specification Sheet
Price: $130.00
AMCO CTR 23 AC/DC Module for the CTR 22
Ref: DD10070
CTR23 AC/DC Module for Long runs, This adaptor must only be connected to the CTR22, +14°F to +140°F operating temperature, panel reset enable.
If item is in stock, it should ship within 1 to 2 business days
Specification Sheet
Price: $37.00
AMCO R10 Industrial Rate Indicator/Totalizer
Ref: DD10080
Industrial Model R10 rate indicator/totalizer, 3V lithium battery, 5 year life expectancy, cycolac X-17 case material, .43" high display size, NEMA 4X with provided gasket front panel rating, 32°-131°F operating temperature, 25 ft maximum wire length, separately programmable count/rate scalers and decimal points allow for display of rate and count in various engineering units, programmable reset enable/disable, remote reset, field replaceable 5 year batter, and high or low speed inputs.
If item is in stock, it should ship within 1 to 2 business days
Specification Sheet
Price: $219.00
AMCO R-420 Industrial Rate Indicator/Transmitter Totalizer
Ref: DD10090
Industrial Model R420 Rate Indicator/Transmitter Totalizer with 4-20 mA signal, high visibility, 16 character, vacuum fluorescent display, single key access to display values or set point, simultaneous display of two values, four electronic outputs for control and remote totalizing, 5 control inputs for remoter operation, easy menu for password-protected field programming, built in power supply for transmitters, 10 year memory and RS-485 communications
If item is in stock, it should ship within 1 to 2 business days
Specification Sheet
Price: $708.00
AMCO Type B Pulser
Ref: DD10100
Type B Pulser, limit switch, 2 wire, 1 contact = 1 USG all sizes, this unit requires power from an external source. The pulser can be set up as a normally open contact or a normallly closed contact, provides a contact closure for a limit switch with a max rating amps at 125 VAC, register housing and register are 3 1/2" diameter style
If item is in stock, it should ship within 1 to 2 business days
Specification Sheet
Price: $59.00
AMCO Type A Pulser
Ref: DD10099
Type A Pulser, generator, 2 wire, 1 contact = 1 USG all sizes, this unit requires power from an external source. The pulser can be set up as a normally open contact or a normallly closed contact, provides a contact closure for a limit switch with a max rating amps at 125 VAC, register housing and register are 3 1/2" diameter style
If item is in stock, it should ship within 1 to 2 business days
Specification Sheet
Price: $59.00
AMCO LRP Industrial Pulser
Ref: DD10110
Industrial pulser LRP, reed switch rated at 4 watts, non inductive, magnetically actuatored to provide a 50/50 open/close ratio and requires power from an external source weatherproof with 9 to 10 feet of 2-wire shielded cable exiting from an epoxy sealed case, magnetically driven,
If item is in stock, it should ship within 1 to 2 business days
Specification Sheet
Price: $190.00
AMCO HRP Industrial Pulser
Ref: DD10120
Industrial pulser HRP, the transmitting element is a slotted disc and opto vane switch which requires power from an external source, power requirment 6-15 VDC, weatherproof with 9 to 10 feet of 3-wire shielded cable exiting from an epoxy sealed case, magnetically driven,
If item is in stock, it should ship within 1 to 2 business days
Specification Sheet
Price: $267.00
powered by:
©2008 AC Controls Company, Inc. All Rights Reserved
Site Map
|
Privacy Policy
|
Legal Info
