Search:
Advanced Search
Industrial Metering Products
>
Hot Water Meters
AMCO S130 Hot Water Single Jet Meter
The ¾" S130 single-jet hot-water meter (up to 195° F and 150 psi) offers high accuracy (±2%) throughout the normal flow range, exceeding AWWA positive displacement and multi-jet meter specifications, and low flow accuracy ±5%. The normal operating range of the S130 is 1 to 22 gpm.
The S130 is available with pulse output for connection to submetering automatic meter reading systems or industrial totalizing/control equipment.
AMCO M150 Hot Water Meters (195 Degrees F)
The M150, sizes 1'' and 1½'', is a multi-jet inferential impeller meter with NPT inlet and outlet. The M150 is designed for batch or continuous process monitoring of hot water up to 195° F and services up to 150 psi.
M150 meters can be equipped to provide dry contact reed switch output of 1 contact per gallon.
AMCO M190 Hote Water Meter (266 Deg F, 230 PSI)
The M190 hot water meter, sizes 1'' and 1½'', is a multi-jet inferential meter designed for batch or continuous process monitoring of hot water up to 266° F in services up to 230 psi.
A pulse unit is integral to the meter and consists of the pulse element (a 4-watt rated reed switch) and clear lens housing with meter securing ring and 9-10 feet of 2-wire unshielded cable exiting from a sealed fitting.
AMCO H4300 Hot Water Turbine Meter
Model H4300 is a Woltman-design horizontal impeller meter, with only two moving parts, the impeller and magnet. The H4300, in sizes 2" h to 6", is a high accuracy turbine meter, operating with low flow accuracy ±3% and accuracy ±1% up to peak flow. The H4300 is recommended for measurement up to 250° F and pressure up to 230 psi. Either a reed switch element or opto-electronic pulse transmitter can be selected for the H4300.
AMCO H4400 Hot Water Turbine Meter
Model H4400 can be installed in services where water temperature can reach 350° F and pressures are up to 195 psi (250° F at pressures up to 230 psi). Available in sizes 2'', 3'' and 4'', model H4400 offers improved low flow performance (± 2%). Two externally powered pulser models are available for the H4400, a reed switch pulser for output of 1 contact per 10 or 100 gallons, and an inductive (Namur) pulser for higher resolution (3.785 contacts per 1 gallon).
powered by:
©2010 AC Controls Company, Inc. All Rights Reserved
Site Map
|
Privacy Policy
|
Legal Info
